内部激励源二自由度结构扬声器振动特性分析

有别于多数基于简单振子结构的扬声器,针对一类内部激励源二自由度(IE2DOF)结构的扬声器,用类比线路图法建立集总参数模型,计算分析了这种结构的频率响应,同时计算了其固有共振频率和固有反共振频率。使用叠加法分析内部激励源对频响的影响。最后实际测量和理论计算吻合,进一步支持了理论模型,揭示了IE2DOF结构扬声器的振动特性。     

Selective fluorescence and naked eye detection of histidine in aqueous medium via hydrogen bonding assisted Schiff base condensation

Visible light excitable rhodamine B derivative (TARDHD) has been developed for fluorescence and naked eye detection of histidine in aqueous medium. TARDHD shows 45 fold fluorescence enhancement in the presence of histidine. It forms Schiff base with histidine and stabilizes via intra-molecular H-bonding. TARDHD can efficiently detect intracellular histidine.     

Computational Study of the Electron Spectra of Vapor-Phase Indole and Four Azaindoles

After geometry optimization, the electron spectra of indole and four azaindoles are calculated by density functional theory. Available experimental photoemission and excitation data for indole and 7-azaindole are used to compare with the theoretical values. The results for the other azaindoles are presented as predictions to help the interpretation of experimental spectra when they become available.     

Wavelet subspace decomposition of thermal infrared images for defect detection in artworks

Health of ancient artworks must be routinely monitored for their adequate preservation. Faults in these artworks may develop over time and must be identified as precisely as possible. The classical acoustic testing techniques, being invasive, risk causing permanent damage during periodic inspections. Infrared thermometry offers a promising solution to map faults in artworks. It involves heating the artwork and recording its thermal response using infrared camera. A novel strategy based on pseudo-random binary excitation principle is used in this work to suppress the risks associated with prolonged heating. The objective of this work is to develop an automatic scheme for detecting faults in the captured images. An efficient scheme based on wavelet based subspace decomposition is developed which favors identification of, the otherwise invisible, weaker faults. Two major problems addressed in this work are the selection of the optimal wavelet basis and the subspace level selection. A novel criterion based on regional mutual information is proposed for the latter. The approach is successfully tested on a laboratory based sample as well as real artworks. A new contrast enhancement metric is developed to demonstrate the quantitative efficiency of the algorithm. The algorithm is successfully deployed for both laboratory based and real artworks.     

普适的基于能量的分块局域激发态聚类算法

在普适的基于能量的分块(GEBF)方法的框架下, 大体系的局域激发(LE)能可通过一系列活性子体系激发能的线性组合近似得到, 从而有效降低了计算的时间标度. 然而, 在体系的局域激发具有多个激发态的情形下, 如何有效识别所有活性子体系的激发特征并将其组合是一个挑战. 提出了一种基于局域激发态聚类的算法. 该方案基于空穴-电子分析和基于密度的聚类(DBSCAN)机器学习算法, 可以自动地聚合不同子体系中最相似的激发态并组合得到相应的局域激发态能量或激发能. 结合该算法改进的LE-GEBF方法在荧光分子衍生物、 荧光染料-水团簇及绿色荧光蛋白模型体系的计算中均获得了令人满意的结果. 该算法有望大大提升LE-GEBF方法在计算局域激发时的稳定性和准确性, 并可以有效处理吸收光谱具有多重峰的大体系.     

用于宽谱带发射白色发光二极管的黄色荧光粉Sr8MgAl(PO4)7∶xEu2+的制备及发光性能

通过高温固相反应合成了一系列宽谱带发射黄色荧光粉Sr_8MgAl(PO_4)_7∶x Eu~(2+)(SMAP∶x Eu~(2+)),并对其物质结构、发光性能及其在白色发光二极管(WLED)领域的应用进行了探究。X射线衍射(XRD)测试结果表明,SMAP∶x Eu~(2+)系列荧光粉具有单斜结构和C2/m空间群,激活剂Eu~(2+)离子能够很好地进入SMAP基质中并占据Sr~(2+)离子的晶格位点。漫反射光谱分析显示SMAP基质属于宽带隙材料,带隙宽度为3.60 e V。此外,SMAP∶x Eu~(2+)具有较宽的激发范围(280～500 nm),对应于Eu~(2+)离子的4f~7→4f~65d~1跃迁;在380 nm近紫外光激发下,呈现出450～800 nm的多发光中心的非对称黄光发射,发射峰位于590 nm处。基于高斯多峰拟合结果,得到3个发光中心,分别位于528、600和680 nm。最后,将已制备的黄色荧光粉SMAP∶0.05Eu~(2+)与商业化蓝粉Ba Mg Al_(10)O_(17)∶Eu~(2+)混合涂覆到400 nm芯片上制得色温较好(3 344 K)、显色指数较高(90.1)的WLED。     

两种发电机励磁系统远程监测与控制方法研究

同步发电机励磁控制系统的监控是保证发电机良好运行的重要部分,远程监控技术能够有效的对发电机励磁控制系统进行监控,并为励磁控制系统维护人员提供方便.因此针对同步发电机励磁控制系统的典型监测和控制功能,给出了两种发电机励磁系统远程监控方法,首先基于AJAX技术,给出了一种基于web的励磁控制系统远程监测方法,所设计的监测系统能够在局域网或internet网络环境下,使用计算机或智能手机的浏览器进行励磁控制系统的监测,实际测试表明该方法是可行的.之后,为能实现励磁控制系统的远程实时控制,并解决internet网络环境下实时数据传输不稳定的情况,给出了一种基于TCP/IP和VPN技术的励磁控制系统远程监控方法,测试表明该方法能够实现励磁控制系统的实时监测和控制.     

Cooling-down of thermal thick probes after flash excitation – A measure for the real energy density?

Though flash lamps are one of the most applied heat sources in the field of Thermographic Testing (TT) using active thermography, only little is known about the actually achieved energy input into test objects. In this paper, an easy to realize sensor concept is proposed and experimentally evaluated. The concept is based on the measurement of the surface temperature of a thermal thick probe after flash excitation. After considering the sensor concept with FEM simulations the experimental investigation of four materials (two polymer and two building materials) is described. It will be shown that a suited coating is essential for the realization of the sensor concept. The experimental results prove the suitability of black rigid PVC as the most promising material. Using a coated PVC sample the energy density of short laser pulses, similar to flashes of flash lamps, could be determined exactly with an estimated relative uncertainty of only a few percent.     

DNA Nanoflowers for Multiplexed Cellular Imaging and Traceable Targeted Drug Delivery

We present a facile approach to make aptamer‐conjugated FRET (fluorescent resonance energy transfer) nanoflowers (NFs) through rolling circle replication for multiplexed cellular imaging and traceable targeted drug delivery. The NFs can exhibit multi‐fluorescence emissions by a single‐wavelength excitation as a result of the DNA matrix covalently incorporated with three dye molecules able to perform FRET. Compared with the conventional DNA nanostructure assembly, NF assembly is independent of template sequences, avoiding the otherwise complicated design of DNA building blocks assembled into nanostructures by base‐pairing. The NFs were uniform and exhibited high fluorescence intensity and excellent photostability. Combined with the ability of traceable targeted drug delivery, these colorful DNA NFs provide a novel system for applications in multiplex fluorescent cellular imaging, effective screening of drugs, and therapeutic protocol development.     

Rational Design of Cyclometalated Iridium(III) Complexes for Three-Photon Phosphorescence Bioimaging

Compared to 2PE (two-photon excitation) microscopy, 3PE microscopy has superior spatial resolution, deeper tissue penetration, and less defocused interference. The design of suitable agents with a large Stokes shift, good three-photon absorption (3PA), subcellular targeting, and fluorescence lifetime imaging (FLIM) properties, is challenging. Now, two Ir^III complexes (3PAIr1 and 3PAIr2) were developed as efficient three-photon phosphorescence (3PP) agents. Calculations reveal that the introduction of a new group to the molecular scaffold confers a quadruple promotion in three-photon transition probability. Confocal and lifetime imaging of mitochondria using Ir^III complexes as 3PP agents is shown. The complexes exhibit low working concentration (50 nm ), fast uptake (5 min), and low threshold for three-photon excitation power (0.5 mW at 980 nm). The impressive tissue penetration depth (ca. 450 μm) allowed the 3D imaging and reconstruction of brain vasculature from a living specimen.